Table of Contents
Advertisement
Machine Controls and Indicators
3.6
PLATFORM CONTROL INDICATOR PANEL
15
1. System Distress
2. Drive Orientation
3. Capacity Zone Indicator
4. Tilt Alarm / Warning
5. AC Generator
6. Creep Speed
7. Footswitch Enable
8. Glow Plug
9. Fuel Level
3.6.1
Platform Control Indicator Panel Functions
AC Generator
Indicates the generator is in operation.
Capacity Zone
Indicates the platform capacity zone for the current position of the platform. Restricted capacities are
permitted at restricted platform positions (shorter boom lengths and higher boom angles).
Note: Refer to the capacity decals on the machine for restricted and unrestricted platform
capacities.
Creep Speed
When the Function Speed Control is turned to the creep position, the indicator acts as a reminder
that all functions are set to the slowest speed.
Drive Orientation
When the boom is swung beyond the rear drive tires or further in either direction, the Drive
Orientation indicator will illuminate when the drive function is selected. This is a signal for the
operator to verify that the drive control is being operated in the proper direction (i.e. controls
reversed situations).
54
1
2
3
!
!
!
14
13
10. Engine Emissions System Failure
11. Level System
12. Platform Overload
13. Wire Rope Service
14. Engine Error
15. Emissions Temperature
31222372
4
5
6
7
8
11
10
12
9
F
½
E
BM000408A
!
800S, 860SJ
Advertisement
Table of Contents
