Table of Contents
Advertisement
Machine Controls and Indicators
Main Lift / Swing
Provides main lift and swing. Push forward to lift up, pull backward to boom
down. Move right to swing right, move left to swing left.
Note: Main Boom Lift and Swing functions may be selected in combination.
Maximum speed is reduced when multiple functions are selected.
Platform Level Override
A three position switch allows the operator to adjust the automatic self leveling
system. This switch is used to adjust platform level in situations such as
ascending/descending a grade.
Only use the platform leveling override function for slight leveling of the platform.
Incorrect use could cause the load/occupants to shift or fall. Failure to do so could
result in death or serious injury.
Platform Rotate
Provides rotation of the platform.
Power / Emergency Stop
A two-position red mushroom shaped switch furnishes power to Platform
Controls when pulled out (On). When pushed in (Off), power is shut off to the
platform functions.
Soft Touch / SkyGuard / SkySense Indicator
Indicates the Soft Touch bumper is against an object or the SkyGuard sensor has
been activated. All controls are cut out until the override button is pushed. For
Soft Touch, controls are then active in the Creep Mode or for SkyGuard, controls
will work normally.
When Soft Touch is active, the indicator will be on continuously and the alarm
will sound. When SkyGuard is active, the indicator will flash, and the horn will
sound continuously.
If machine is equipped with SkySense, the switch will mute the SkySense
speakers.
Soft Touch / SkyGuard / SkySense Override
For machines equipped with SkyGuard:
The SkyGuard override switch enables functions cut out by the SkyGuard system
to be operated again, allowing the operator to resume use of machine
functions.
52
WARNING
31222372
800S, 860SJ
Advertisement
Table of Contents
