Clearsky Smart Fleet; Access Control - Clearsky Smart Fleet™ (If Equipped) - JLG 800S Operation & Safety Manual

Machine Operation

4.15 CLEARSKY SMART FLEET™

ClearSky Smart Fleet™ integrates on-machine hardware with web-based software and a
mobile app to provide fleet management data and analytics. Personnel with the
appropriate permissions can access telematics and machine identification data using a
dashboard visible in the ClearSky Smart Fleet web portal or the ClearSky Smart Fleet
mobile app. (Navigation and visual configuration may vary between the web portal or
mobile app.)
Features include machine monitoring such as fuel level and battery charge, remote
analyzer tasks including diagnostic trouble codes or system alerts, and access control (if
available) restrictions.
Refer to the Access Control and Beacons sections of this manual for more information.
Visit the ClearSky section of the JLG website for more resources and information about
accessing web portal or mobile app data.
4.16 ACCESS CONTROL - CLEARSKY SMART FLEET™ (IF
EQUIPPED)
Operator access to the machine may be placed into a restricted state remotely.
If a modification to a restricted state is required, contact the ClearSky Smart Fleet™
account owner. Only authorized personnel can make changes from within the web
portal or mobile app.
This machine may be equipped with ClearSky Smart Fleet Access Control. Using the
ClearSky Smart Fleet mobile app or web portal (remotely or locally), the machine can be
placed into restricted states that limit machine functionality for all operators.
By using this machine, the operator acknowledges Access Control functionality,
including restricted states, and accounts for it in their safe use plan.
Restricted states may include:
1. Speed Restricted — Machine is in Creep mode. See Operation section for more
information on machine mode.
2. Speed and Function Restricted — Machine is in Creep mode and boom
movement is restricted to transport position. In this state, once the boom reaches
the transport position, it is not permitted to leave that defined position.
3. Locked Out — Machine has been locked out and will not operate (including
engine start and auxiliary power, if applicable).
74
NOTICE
31222372 800S, 860SJ