Table of Contents
Advertisement
7.11 OPERATOR MAINTENANCE
Note: The following numbers correspond to those in
cation
Diagram.
KEY
Multipurpose Grease having a minimum dripping point of 350° F (177° C). Excel- lent water
resistance and adhesive qualities, and being of extreme pressure type. (Timken OK 40 pounds
MPG
minimum.)
Extreme Pressure Gear Lube(oil) meeting API service classification GL-5 or MIL- Spec MIL-L-
EPGL
2105
Hydraulic Oil. API service classification GL-3, e.g. standard UTTO.
HO
Engine(crankcase).Gas(5W30)- APISN,-ArcticACEAAI/BI,A5/B5- APISM,SL,SJ, EC, CF,CD- ILSACGF-
EO
4. Diesel (15W40, 5W30 Arctic) - APICJ-4.
Lubrication intervals are based on machine operation under normal conditions. For
machines used in multi-shift operations and/or exposed to hostile environments or
conditions, lubrication frequencies must be increased accordingly.
Note: It is recommended as a good practice to replace all filters at the same time.
1. Swing Bearing - Internal Ball Bearing
Lube Point(s) - 1 Grease Fittings
Capacity - A/R
Lube - MPG
Interval - Every 3 months or 150 hrs of operation
Comments - Remote Access
800S, 860SJ
General Specifications and Operator Maintenance
Table 15. Lubrication Specifications
NOTICE
Figure — Maintenance and Lubri-
SPECIFICATIONS
31222372
145
Advertisement
Table of Contents
