Oscillating Axle Lockout Test (If Equipped); Emergency Towing - JLG 800S Operation & Safety Manual

Machine Operation

4.19 OSCILLATING AXLE LOCKOUT TEST (IF EQUIPPED)

Lockout system test must be performed quarterly, any time a system component is
replaced, or when improper system operation is suspected.
Refer to General Specifications & Operator Maintenance Section — Oscillating Axle
Lockout Test for procedure (if equipped).

4.20 EMERGENCY TOWING

Towing this machines is prohibited unless properly equipped. However, provisions to
move the machine have been incorporated. For specific procedures, refer to Section 5.
78
NOTICE
31222372 800S, 860SJ