Channels And Timer Manager - Strong skylink SRT 7502 Installation Instructions Manual

7.1.6 FST/FNT Search
The submenu allows you to search again manually for the broadcaster's (FST) channel list. This option
you can use to search when new channels are broadcasting but not installed yet. Simply select this
option and press OK to start.

7.2 Channels and Timer Manager

Select a menu item you'd like to manage TV Manager, Radio Manager,Delete all and Timer Manager. Use
pq to highlight the submenu of choice and press OK to select.
7.2.1 TV Manager
The menu allows you to create Favourite lists, Move channels in order, Lock channels with PIN protection
and Delete channels from the TV list.
7.2.1.1 Adding channels to favourite lists
Channels from the Channel List can be added to up to 8 different favourite groups. Press the red button
Fav and select the wanted FAV group and press 2 x times u. Use pq to select a channel you wish to
add to a favourite group. When the highlight is on the channel of your choice, press OK. In the middle
column will you see your new created favourite list. If you would like to remove a channel from the
favourite list, select that channel in the Favor list and press OK to delete.
Sorting of selected FAV list is possible by selecting the channel and press the yellow Move button.
Behind the selected channel the move icon will be shown. Use pq to select the new position. Press
the yellow Move button again. Select another channel to move or press  to finalize the process. A
confirmation banner will pop up. Select OK to save the changes or Cancel to discard.
7.2.1.2 Move channels in Program channel list
Moving position of the channels belonging to the Fast Scan list of the operator below number 4000 is
not possible. Moving of channels in the Program list above 4000 is possible.
In TV manager select under Operation the option Move. Use u to jump to the Program List and use pq
to select the channel you wish to move and press OK to select. It is possible to move one at the same
time. All channels you would like to move are shown under column Selected.
Once ready select a group or single channel. Move the cursor in the Program List to the position where
all of the single channel(s) need to move to. Press Yellow Move button to move these into the Program
List below the selected position. Repeat above steps if you would like to move more channels.
Once ready press  to finalize the process. A confirmation banner will pop up. Select OK to save the
changes or Cancel to discard.
7.2.1.3 Lock channels
Protect channels with PIN code before you can watch them. Select the option Lock and press u to jump
to the Programme List. Use pq to select a channel you wish to protect. When the highlight is on the
channel of your choice, press OK. In the middle section you will see your protected channels list. If you
would like to remove a channel from the list, then press t u and select that channel and press OK to
unselect.
16