Strong skylink SRT 7502 Installation Instructions Manual page 23

Table of Contents

Advertisement

CEC
7.3.3 Lock
This menu enables you to define and edit your PIN code, set Installation or Menu Lock. Choose a setting
with pq and press OK to list the possibilities or use t u to change the value of the highlighted setting.
Use the 0~9 buttons to access this menu options below. Enter the (Default PIN: 0000) if you have not
changed it.
Menu Lock
Programme Lock
Change PIN
New PIN Code
Confirm PIN Code
7.3.4 Parental Rating
Parental Lock allows you to prevent children from watching adult channels if these channels support
EPG or submit EPG based parental rate for your country. Adjust the Parental Rate accordingly.
Lock Level
Not Rated Content
NOTE:
7.3.5 Local Time
Setup your time zone for clock/time in your menu and system.
GMT Offset:
Summer Time:
Select On if you would like to share basic remote control functions like
Standby and Volume over the HDMI CEC control.
These remote commands are send over the HDMI cable to the connected
device.
Select ON or OFF. Menu Lock allows you to lock the access to menus.
Immediately if you press menu a PIN request banner will pop-up.
Select ON or OFF. Programme Lock allows you to lock or unlock the access to
channels which have a LOCK set before.
Use OK to enter the menu to Change PIN code.
Enter the PIN code of choice with the 0~9 buttons.
(Make a note of it)
Use the 0~9 buttons to confirm your new PIN code. If you confirmed with the
correct PIN code a banner will pop up with a message and press OK to store
and exit from this menu.
Use t u to change these settings. Following rates are available: Lock None,
Lock All, 3 up to 18 years. Depending on the adjusted setting you will have to
enter your PIN code when switching through channels which support EPG or
submit EPG based parental rate.
Some channels do not carry parental information at all. The receiver cannot
protect to watch these channels with PIN code. If you would like to block
these, then select Blocked.
If you are using another Parental Lock Level function than Lock None, all FTA
channels which support EPG or submit EPG based parental rate will require
entering of your PIN code (Default PIN: 0000).
Allows you to adjust the time zone you live in. The GMT Offset range is
"-11:00 ~ +12:00".
Select Off or On to add one extra hour for summer time during the Daylight
Saving period.
19

Advertisement

Table of Contents
loading

Table of Contents