Table of Contents
Advertisement
3. Via the CH+/CH- or P-/P+ keys.
6.1.1 Direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 buttons on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits
is possible. After entering the channel number, wait a few seconds and your receiver will switch to the
selected channel.
6.1.2 Channel list alphabet
Press OK in viewing mode to display the channel list. Use pq or P+/P- in the channel list to highlight
the channel of your choice and press OK to switch to the highlighted channel.
The channel list is equipped with a filter function to facilitate finding your favourite channels. While in
the channel list, press RED. A menu will open with filter options at the left hand side Sort, in the middle
Class and on the right-hand side the channel Programme list. Use pq at the left-hand side to select Sort
to make follow selections:
ALL
A-Z
FAV
SAT
To return to the original channel list, select a channel from channel list and press OK or .
6.1.3 Using the CH+/CH- buttons
CH+ or p will switch to a higher channel number.
CH- or q will switch a lower channel number.
6.2 Info Banner
Anytime during viewing mode you can press the INFO button to get information about the current
channel and programmeme*. Press INFO twice to display detailed programme information of the
current or next programme. For the current programme information use t u to change between the
current and next event information. Press the button a third time to close the info banner.
* Programme information is displayed when available. Availability depends on the broadcast.
6.3 Selection of audio language
Some channels support a choice of different audio formats and/or languages. To select another audio
stream, press AUDIO in viewing mode. A list with the available audio languages will be displayed. Press
pq to select an audio language and confirm with OK. It is also possible to select another audio mode
with t u. When your settings have been made, press OK to apply.
6.4 Teletext
Your receiver includes a fully featured videotext (Teletext). To access it, press the TEXT button in viewing
mode and enter the page number of choice with the 0~9 buttons. You can use also the pq buttons to
step through the videotext pages. In this mode the usage of VOL+/VOL- and ! is supported as well. If
subpages are available for the current page, use t u to select one of the subpages. Press to quit.
10
Show all TV or Radio channels in normal order.
Calls the middle Class banner of the alphabet. Select a letter and at the right-
hand side the channels will be shown in this order.
Displays the favourite lists
Opens selection to find a channel from a satellite.
Advertisement
Table of Contents
