Table of Contents
Advertisement
Green Step:
Press the Green button Step to open the Jump By Time menu. You can select a time
where you'd like to jump to.
INFO Hide:
Press the INFO button Hide to remove or call the timeline information banner.
Media:
GREEN Jump:
Press the Green button Jump to open the Jump By Time menu. You can select a time
where you'd like to jump to.
INFO Hide:
Press the INFO button Hide to remove or call the timeline information banner.
Music:
UP/DOWN:
Enter the folder with music files. Use the pq to select a file and press u or OK button
to start playback. To stop playback press 3.
Pictures:
UP/DOWN:
Enter the folder with pictures files. Use the pq to select a picture. If format is
supported then in the small PIP screen it shows the picture. Press OK button to watch
it in full screen mode.
RED Interval:
Before the playback of a picture in full screen, you can setup a slideshow / diashow.
Press the Red button Interval to enter the sub option menu Select time interval. Select
time of the slide show or switch this function off. After you select a time, press OK and
show starts to play. Press the button to stop.
7.4.2 DVR setup
This menu allows you to setup settings for Timeshift functions, DVR Timer start and stop handlings.
The following settings are available:
Timeshift Status:
Timeshift Step:
Timeshift Duration:
Start record earlier:
End record later:
REC Icon:
Playback Repeat:
7.4.3 Storage Device Setup
This option shows relevant information about the connected USB device. In this menu you can also
format your USB storage device and safely remove.
Select Storage Device Setup in the Storage menu and press OK to enter.
Choose Enable to activate the Timeshift function and Record DVR function
will be switched Off.
Choose Disable to deactivate the Timeshift function and Record PVR function
will be switched On.
Use the 0~9 buttons to enter the time steps in playback
Use the 0~9 buttons to enter the total time space you would like to use on
the external connected USB device.
Select a time to start record earlier as programmed. This is a nice function if
you booked events directly from EPG which can be sometimes wrong in time,
due to actuallities.
Select a time to stop the record later as programmed.
Select between 5 Sec 5 seconds or 10 Sec 10 seconds to show the record Icon
on screen after you start record. Select On for always show the Icon during the
record.
Select between On to start over again playback of record you watching. Select
Off to stop normal at the end.
21
Advertisement
Table of Contents
