Operation; Changing Channels; Info Banner - Strong SRT 7010 User Manual

Digital hd satellite receiver
Table of Contents

Advertisement

Choose channels with p/q. Alternatively, you can also enter the channel number with the 0~9
buttons on the remote control or press OK in viewing mode to display the channel list.
The volume can be adjusted with tu.

6.0 OPERATION

In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7 to get familiar with the menu of your new
receiver.

6.1 Changing channels

There are different ways to change channels with your new receiver.
Via direct access
Via the channel list
Via the p/q buttons
Via the 9 button
6.1.1 Direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 keys on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press OK in viewing mode to display the channel list. Use p/q to highlight your channel of choice
and press OK once to select the highlighted channel. The channel list is equipped with a Find function
to make it easier to find channels. In the channel list, press RED and an alphabet banner will be
displayed. Use p/q tu to select the first letter (or letters) of your channel of choice and select OK
to confirm or just press . All channels beginning with the chosen letter(s) will now be displayed.
Select the channel in the filtered list.
The following buttons are available in the channel list and in viewing mode:
RED:
TV/R:
4
6.1.3 Using the
p
p will switch to a higher channel.
q will switch a lower channel.
6.1.4 Using the 9 button
Use the 9 button for switching between the last 8 viewed channels. Please refer to section 7.6 for
more details.

6.2 Info Banner

At any time during viewing mode you can press the INFO button to get information about the
current channel as well as the current and following programme*. Press INFO twice to view detailed
10
Opens an alphabet banner to quickly find a channel
Toggles between TV and radio channels
Opens the Satellite List for satellite selection
/
buttons
q

Advertisement

Table of Contents
loading

Table of Contents