Table of Contents
Advertisement
7.2.1.4 Delete channels
Delete a channel or channels permanently from the main channel list (until you make a new search).
Select the option Delete and press u. Use pq to select the channel you wish to delete. When the
highlight is on that channel, press OK. In the middle section you will find the selection to delete from the
channel list. If you are ready then press and confirm.
7.2.2 Radio Manager
Create favourite lists, move channels in order, lock channels with PIN protection and delete channels
from radio list. The functions of handling are the same as in the TV Manager as subscribed above. The
only difference is that in Radio manager there is no video information, so it will always display the radio
background on the preview screen.
7.2.3 Delete All
Here you can delete all channels, all TV channels or all Radio channels. To clear these channels from
memory of the receiver, you have to enter your PIN code (Default PIN: 0000), then use pq to select
OK to execute or Cancel to return to the menu. Afterwards you need to press Menu select the First Time
Installation or FST/FNT Search to install channels again.
7.2.4 Timer
The menu allows you to setup up16 timer events. Timers can be used to schedule recordings or to
switch to a certain channel at a specific time. It reminds you of watching your favourite events. Above
the settings, the current date and time is displayed.
Use pq to select Timer Manager from the Channel menu and press OK to enter.
The receiver will display a list with16 timers, followed by their respective status. Select the timer you wish
to set or change with pq and press OK to proceed. The timer setup menu will now be displayed.
The following settings are available:
Timer Mode:
Timer Service:
Channel:
Date:
Time:
Duration:
When all preferred settings are made, press to exit and save. To switch off the timer, select the timer
event again and select in Timer Satus the option Off.
NOTE:
Choose between Once (Timer will wake-up the receiver) or Off (Timer will not
start the scheduled event).
Also you can select Monday-Friday, Daily and Weekly.
Choose between Wake up to wake-up the receiver, Choose Record to time a
recording to an external USB device.
Press OK to open the channel list and use pq to select the channel where
the timer will wake up with.
Use the 0~9 buttons to enter the date for the timed event.
Use the 0~9 buttons to enter the start time.
Use the 0~9 buttons to enter the timer duration.
If one timer is in conflict with another one or if the set time already has
passed, the receiver will display a warning and ask how to solve the conflict.
17
Advertisement
Table of Contents
