Table of Contents
Advertisement
screen banner. Here you can select options to step, to rewind or jump forward and to read details of
event and time.
WARNING:
NOTE:
7.0 MAIN MENU
Press MENU in viewing mode to display the menu. All important settings and features of your receiver
can be operated from this menu. It consists of the following sub-menus: Installation, Channel, Settings,
Storage and Tools.
Use t u to select a sub-menu and pq to choose an option. Press OK to advance to the chosen
submenu.
7.1 Installation
This menu allows you to change satellite settings and to search for channels. Furthermore, you can
adjust important settings for your receiver. It consists of the following sub-menus: Installation Guide, Dish
Settings, Motor Settings, Channel Search, Manual Search and FST/FNT Search. Choose a sub menu with
pq and press OK to advance.
7.1.1 Installation Guide
Use this menu to follow the first installation wizard again as you did the first time to install the receiver.
It will guide you through the Welcome 1st Step: Language to the last Step6 to search for channels.
7.1.2 Dish Settings
Use this menu to change or add settings for an already installed or a new satellite and to configure its
parameters. Here you can configure which type of DiSEqC you are using, use t u to change. In case
your setup differs from the default setting, you can adjust DiSEqC to any port you would like. If you use
DiSEqC OFF you will only be able to setup one satellite. For usage with DiSEqC 1.0 you can setup up
to4 satellite positions. If you use DiSEqC 1.1 you can setup up to 16 satellites positions.
Satellite
LNB Power
LNB Type
LNB Freq.
22KHz Tone
DiSEqC 1.0
For encrypted channels broadcasting rights may be limited by the provider,
which is why some channels are restricted during playback to fast forward/
rewind, or possibly limited in another way. When the Maturity Rating is
activated for a certain programme, you must enter the corresponding
PIN code Maturity Rating master PIN: 0000 to be able to record this
programme.
The default maturity rating master PIN can be changed by the operator.
Press OK to open the list of available satellites and chose the preferred
satellite with pq or P+/P- and confirm by pressing OK.
Change the LNB power with t u if necessary.
Shows which type of LNB is supported universal LNB.
Show the Local Oscillator Frequency of the Universal LNB 9750/10600.
This setting shows that it is set to automatically. Auto.
Select a port 1 to 4 according to the connected satellite dish.
13
Advertisement
Table of Contents
