Related Manuals for Strong SRT 7505
Summary of Contents for Strong SRT 7505
- Page 1 Digital High Definition Satellite Receiver SRT 7505 Bedienungsanleitung User Manual...
- Page 2 Model: Digital HD Satellite Receiver SRT 7505 ON/OFF USB: DC 5 V, 1.0 A max. 13/18 V 350 mA max. COAXIAL S/PDIF MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AND THE DOUBLE-D TV SCART SAT IN SAT OUT SYMBOL ARE TRADEMARKS OF 24 W max.
- Page 3 Model: Digital HD Satellite Receiver SRT 7505 ON/OFF USB: DC 5 V, 1.0 A max. 13/18 V 350 mA max. COAXIAL S/PDIF MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AND THE DOUBLE-D TV SCART SAT IN SAT OUT SYMBOL ARE TRADEMARKS OF 24 W max.
-
Page 4: Table Of Contents
8.0 TRoUBleSHooTIng 9.0 SpeCIfICaTIonS STRong declares that this item complies with the basic requirements and other relevant regulations of directives Ce 2004/108/eC and 73/23/eC, RoHS 2002/95/eC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. -
Page 5: Introduction
1.0 InTRoDUCTIon 1.1 Safety Instructions Do noT InSTall YoUR ReCeIveR: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots. Do noT eXpoSe THe ReCeIveR oR ITS aCCeSSoRIeS: To direct sunlight or any other equipment that generates heat;... -
Page 6: Accessories
„ Always make backups of data on your USB storage device before using it with this receiver. STRONG will not take responsibility for any loss of information or circumstances caused by loss of information. Please ensure that either the USB device is already formatted to FAT/FAT32, or format the USB „... -
Page 7: Rear Panel
2.3 Rear panel Fig. 2 1. SaT In To connect to the LNB of your satellite antenna for reception of satellite broadcast signal 2. SaT oUT To loop through the satellite signal to a second receiver 3. CoaXIal S / pDIf To connect to a digital amplifier or home theatre 4. -
Page 8: Installing The Batteries
31. gReen In menu for specific functions. 32. YelloW In menu for specific functions. 33. BlUe In menu for specific functions. 2.5 Installing the batteries Fig. 4 Remove the battery cover from the remote control and put 2x AAA size batteries inside the compartment. -
Page 9: Connecting Multiple Fixed Antennas Via Diseqc 1.0 Switch
C: Plug the power adapter jack to the receiver and the other end to a suitable wall outlet. 3.3 Connecting multiple fixed antennas via DiSeqC 1.0 switch Fig. 8 a: Connect the LNBs of your fixed antenna to the desired inputs of a DiSEqC 1.0 switch using a good quality coaxial cable and suitable ‘F-connectors’. -
Page 10: Channel List Selection
5.0 QUICk gUIDe To USIng YoUR ReCeIveR We at STRONG understand that you can’t wait to enjoy your new HD receiver. The following quick guide will make you familiar with the basic operation of this device. We do, however, advice you to read the full manual to get the best performance from your STRONG HD receiver. -
Page 11: Operation
6.0 opeRaTIon In viewing mode, several features are available to make watching TV a true pleasure. This chapter describes these features. Please also read chapter 7.0 to get familiar with the menu of your new receiver. 6.1 Changing channels Your new receiver is equipped with three ways to change channels. 1. -
Page 12: Selection Of Audio Language
buttons. The recording progress banner shows the elapsed and complete recording time. Settings for the display duration can be set in menu 7.1.3 System Settings. *Programme information is displayed when available. Availability depends on the broadcast. 6.3 Selection of audio language Some channels support a choice of different audio formats and/or languages. -
Page 13: Instant Recording
In this part you can also use pq or p+/p- to select or scroll through these. Press ok or gReen to display detailed information about the selected event. Then use pq or p+/p- to scroll through and press to quit.Press BlUe to display programme information for the next day and YelloW to get back one day. -
Page 14: Timeshift
Timeshift only works correctly when a fast USB storage device such as a USB2.0 HDD is connected to the receiver. Distorted picture and/or audio during Timeshift indicate a too slow USB device speed. STRONG cannot guarantee for USB devices used. Especially when Timeshift is activated at channels with high data rate (High quality SD/HD), STRONG cannot guarantee an accurate playback of the Timeshift file. -
Page 15: Antenna Setup
7.1.1 antenna Setup Use this menu to change or add the settings for an already installed or new satellite and to configure its parameters. In the Type line you can adjust if you’re using a DiSEqC switch or not by using tu to change. -
Page 16: Channel Search
If you want to delete a satellite press the gReen button. If you want to delete all satellites that have been setup press the YelloW button to do so. When all settings have been made, press to leave this menu. 7.1.2 Channel Search Use this menu to perform an automatic, network or transponder channel search or to search on all satellites that have been setup. - Page 17 noTe: When you want to add technical data for a new transponder we recommend verifying it by consulting websites like: www.lyngsat.com or www.kingofsat.net or you can refer to professional journals. 7.1.3 System Settings Use the System Settings menu to configure settings for language, audio, video, look and feel of your receiver.
-
Page 18: Select Audio Language
noTe: HDCP (High Definition Content Protection) is set to ON per default as nowadays all TV sets with an HDMI connector support HDCP. If you have problems with the HDMI connection you can use the Scart setting to deactivate HDCP, which will allow watching via HDMI without problems. Consider that movies which are broadcasted with an extra content protection might not be shown when HDCP is set to OFF. -
Page 19: Parental Lock
When available, DVB subtitles will be displayed in the selected language. After all settings are adjusted following to your preference, choose Save with pq and press ok. The receiver returns to the menu. noTe: DVB subtitles on Astra 19.2 are currently available on different German- speaking channels: Das Erste HD, ZDF HD, 3sat HD, arteHD, WDR HD and other popular channels. -
Page 20: Update & Info
This function allows you to perform a software update with a USB storage device. Download the software and update instructions from our website www . strong . tv and unzip it on your PC. Then load the file to the root directory of your correctly formatted USB storage device and connect it to your receiver. -
Page 21: Conditional Access
The OTA (Over the Air) function allows you to search for software updates available on satellite. Please ask your local STRONG dealer or visit our website www . strong . tv for information. After pressing ok on OTA Software Update to execute your receiver will start looking for new software. Follow all instructions that are displayed on screen. -
Page 22: Channel Manager
Use tu to change the age between 4 – 18 years. When finished use pq to select Save to apply or Cancel to return to the menu. When you save the age setting the receiver displays a generated PIN code. Please note this PIN code for access to watching content. - Page 23 Delete channels Press the ReD button to toggle between delete modes and then press ok to highlight the selected channels for deletion. Press once to delete a single channel or different selected channels from your channel list, press twice to delete the complete transponder of the selected channel (this will highlight all present channels), press three times to delete all channels from the satellite and four times to delete all TV channels from your channel list.
-
Page 24: Hdd Manager
WaRnIng: The format function will delete all recordings, data and information from your USB device. STRONG will not take any responsibility for damaged or lost data on the USB device. Please make a backup copy of important data on your USB device before using it with your receiver. - Page 25 WaRnIng: The format function will delete all recordings, data and information from your USB device. STRONG will not take any responsibility for damaged or lost data on the USB device. Please always backup or copy important data from your USB device before using it with your receiver.
-
Page 26: Timer
7.4.5.2 photo This menu will allow you to playback supported picture files. The functions for pictures does only slightly differ from the music playback. Functions which differ are stated as below: A selected file will be immediately shown in preview mode. Press ok to ... -
Page 27: Troubleshooting
If the receiver does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively you can send a support mail via our website: www . strong . tv. NEVER open or disassemble your receiver. This may cause a dangerous situation... - Page 28 Symptom Cause Remedy The display on front The power adapter is Check that the power adapter is plugged in to panel does not light up. not plugged in or power the wall outlet. Make sure power switch on rear switch OFF. panel is in ON position.
-
Page 29: Specifications
Symptom Cause Remedy No recording, no fast Due to license reasons For encrypted channels the broadcasting forward/rewind during it is possible that a rights of the provider may be limited and thus Timeshift recording cannot be the recording and Timeshift functions may performed with an be constricted and fast forward/rewind may ORF DIGITAL card that... - Page 30 Multimedia Audio playback: MP3* Picture view: JPG, JPEG, BMP* *STRONG cannot guarantee the pvfiles although extensions are listed, as it depends on file size, codec, bit rate and resolution Connectors SAT IN SAT OUT HDMI TV SCART (RGB, CVBS, Audio L/R output with volume control) Digital audio S / PDIF coaxial USB 2.0 port, Type A:...
- Page 33 801 702 017 € 0,14/Min. deutsches Festnetz support_pl@strong.tv € 0,42/Min. max. Mobilfunknetze +380(44)228 24 73 support_dk@strong.tv support_ua@strong.tv www.strong.tv Supplied by STRONG & Co, Japan Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna Austria Email: support_at@strong.tv 05 Jun 2014 11:30...