Table of Contents
Advertisement
Symptom
DVR record
DVR record Start
of a recording not
possible.
DVR playback
A.2 SPECIFICATIONS
Demodulator
Demodulation:
Input symbol rate:
Video Decorder
Profile level:
Aspect ratio:
Video output:
Frame rate:
Audio Decoder
Audio decoding:
Audio mode:
Transcoding for HDMI and S/PDIF:
* Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
Tuner
Type:
Input frequency range:
RF impedance:
Signal level:
LNB power:
DiSEqC version:
Smartcard Reader
Number of slots:
Standard:
Irdeto Version:
System & Memory
Main processor:
Multimedia
Audio playback:
Picture view:
* STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on file size, codec, bit rate and resolution
Connectors
SAT IN
HDMI
Cause
Playback of recordings made
on (another) receiver is not
possible.
Time shift / Instant recording is
set to ON.
MR PIN code is not accepted.
QPSK, 8PSK (integrated in processor)
2 ~ 45 MBaud for DVB-S
Inner code rate 1/2, 2/3, 3/4, 5/6, 7/8
QPSK: 1/2, 3/5, 2/3, 3/4, 5/6, 8/9 & 9/10
8PSK: 3/5, 2/3, 3/4, 5/6, 8/9 & 9/10
MPEG-2, MPEG-4, H.264/AVC
4:3 and 16:9, Pan & Scan, Letterbox, combined, Full Screen
Scart: 576i, CVBS/RGB
HDMI: 576i, 576p, 720p, 1080i, 1080p with HDCP
25 Hz for PAL
MPEG-1 Layer 1 & 2, Dolby Downmix
Mono L/R, Stereo, Dolby® Digital Plus*
Dolby® Digital Plus to Dolby® Digital*
1 F Type, IEC169-24, Female
950 – 2150 MHz
75 Ohm unbalanced
-65 dBm ~ -20 dBm
13/18 V DC (+/- 1 V), max. 500 mA, overload protected
1.0, 1.1, 1.2 and GotoX
1
ISO 7816
3.17.x
MSD 5029
MP3*
JPG, JPEG, BMP*
Remedy
Based on license reasons and rights, playback
is possible only on the receiver on which the
recording was made.
Select in DVR setup menu the Time shift
Status to Disabled.
The operator can change the playback PIN
code on smartcards. (Maturity Rate PIN).
Please, contact your operator.
27
Advertisement
Table of Contents
