Table of Contents
Advertisement
4.1 Language (Step 1)
After connecting your receiver for the first time, the Welcome 1st Step: Language menu will be shown on
screen. First, choose your preferred language by using pq. After selecting, confirm by pressing OK to
go to Step 2.
4.2 Audio and Subtitle Setup (Step 2)
In this next step Welcome 2nd Step: A/V Output Settings menu you can choose your preferred audio
language and TV screen settings. If you are satisfied with the default settings just proceed by pressing
OK at the selection Next.
Aspect Ratio
Aspect Conversion
First Audio Language
Second Audio Language
Subtitle Language
When all settings have been made, proceed with the selection Next and press OK to go to {Step 3.
4.3 Time (Step 3)
In the next step Welcome 3rd Step: Time menu you can change the time zone and select if you would like
to use one hour extra during summertime. To change settings, use pq to select GMT Offset and select
with t u your time zone with t u. With the option Summer Time you can set On for one extra hour
during this time of the year. If the time is correct in the default settings or corrections have been made,
proceed with the selection Next and press OK.
4.4 Channel List Selection (Step 4)
In Welcome 4th Step: Service Searching menu you can decide which of the Fast Scan channel lists you
want to install. Use pq to highlight your selection in blue. Press OK to choose a list and the receiver will
go to Step 5.
NOTE:
4.5 Satellite DiSEqC Selection (Step 5)
In the menu Welcome 5th Step: DiSEqC Select the receiver will do an automatic scan for connected LNBs
and suitable satellites. The most common satellites, such as Astra 23.5E, Astra 19.2E, Hot Bird 13.0E and
Eutelsat 9.0E, will be scanned for availability. Please, wait for a short time to let the receiver complete the
8
Select the TV screen you are using. The options are 16:9 and 4:3.
Select conversion for the TV screen if needed. The options are Pan&Scan,
Letterbox, Pillar or Full screen.
Select the main audio track language which you prefer to hear as first choice.
Either press OK for a list with all available languages or use t u to select a
language.
Select the second audio track language which you prefer to hear if the first
choice not is available.
Subtitles support. Select the preferred language. If not needed, keep this
selection Off.
The Fast Scan channel lists are maintained and updated automatically by
the service list provider and can't be edited. Editing of channels can only
be performed for channels which are saved above channel number4000 or
additionally saved in favourite list(s). If you want to change to another list,
you need to do a Factory Reset.
Advertisement
Table of Contents
