Table of Contents
Advertisement
NOTE:
During any stage of the First Time Installation, you can press BLUE Next to go to the next step or YELLOW
Previous to get back to the previous step.
4.2 Antenna Setup
This receiver is already adjusted for reception of Astra 19.2 satellite with the correct settings. Per default
it is setup for DiSEqC port 1, but you can use the setting as well if you are not connected to any switch.
You only need to change these settings if you are not connected to Astra 19.2 or this satellite is not
connected to port 1 of your DiSEqC switch. To adjust your antenna settings for the Satellite, LNB Power,
LNB Type, LNB Freq, DiSEqC 1.0 and Transponder correctly, use the t u and pq buttons.
For user convenience which have a multi dish installation, the Auto DiSEqC Scan* function is supported,
which can be activated by pressing the GREEN button.
For further details and information about the settings, see chapter 7.1.1 Antenna Setup.
In the First Time Installation, it is possible to adjust the settings for up to 4 satellite positions. To proceed
within the First Time Installation, use the BLUE Next button to follow the steps.
* This new function can recognise available satellites in the persisting antenna installation. The predefined satellites are: Astra 19.2E, Astra
23.5E, Astra 28.2E, HotBird 13.0E and Eutelsat 9.0E.
4.3 Channel list selection
In this menu, you can choose your channel list by pressing pq.
You can choose between ORF List, simpliTV List, Family List and Young Spirit, depending on your
preferences and subscription (an overview about the different channels can be found on our website
www.strong.tv).
In the ORF List you can find mainly Austrian ORF HD channels, respectively the most popular and
preferred German and Austrian Free-To-Air TV channels in SD and HD.
The simpliTV List includes all ORF HD, Austrian private HD channels and those available with an additional
simpliTV SAT HD subscription. Additionally, it provides quick access to popular German and international
Free-to-Air channels. The simpliTV List will be maintained by the broadcaster. Individual changes can be
made if channels have been moved to favourite lists.
The Family list and Young Spirit provides a mixed selection of Austrian and German HD channels, but in
different sequences.
To continue with the first-time installation, press the BLUE Next key.
4.4 Regional Channels
Use pq to decide which ORF2 HD channel should be placed at the 2nd position of the selected channel
list. Press OK to confirm.
After your regional channel is set, press the BLUE Next button to finish the first-time installation. Your
receiver will execute the respective search and afterwards switches automatically to the 1st channel of
your selected list.
Details for a channel search can be found in the chapter 7.1.3 Channel search.
If you select an HDMI resolution which is not supported by your TV, the
receiver will switch to the previous setting automatically after ~10 sec. If you
can see the displayed message, please confirm the selected resolution by
pressing OK.
9
Advertisement
Table of Contents
