Related Manuals for Strong SRT 7806
Summary of Contents for Strong SRT 7806
- Page 1 Digitaler HD+ Satelliten Receiver SRT 7806 Bedienungsanleitung User Manual Kullanıcı Kılavuzul...
- Page 4 Supplied by STRONG & Co, Japan Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna Austria Email: support_at@strong.tv 12 Oct 2016 18:44...
- Page 5 Licenses ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S.
-
Page 6: Table Of Contents
9.0 SPECIFICATIONS 10.0 TERMS & CONDITIONS HD+ (IN GERMAN) STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. -
Page 7: Introduction
1.0 INTRODUCTION 1.1 Safety Instructions DO NOT INSTALL YOUR RECEIvER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a „ „ surface which might obstruct the ventilation slots. DO NOT EXPOSE THE RECEIvER OR ITS ACCESSORIES: To direct sunlight or any other equipment that generates heat;... -
Page 8: Accessories
„ „ USB device via your receiver. Formatting requires entering the PIN code (default 0000) STRONG cannot guarantee the playback of all files although extensions are listed, as it „ „ depends on file size, codec, bit rate and resolution. -
Page 9: Remote Control
3. HDMI To connect to the HDMI input of your TV set using a good quality HDMI cable 4. Tv SCART To connect to TV using a SCART cable 5. Ethernet To connect to a network switch, router or modem 6. -
Page 10: Installing The Batteries
2.6 Installing the batteries Fig. 5 Remove the battery cover from the remote control and put 2x AAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1. Open the cover 2. Install batteries 3. Close the cover NOTE: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed or used with other types of batteries. -
Page 11: Basic Connection Using A Scart Cable
a. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good quality coaxial cable and suitable ‘F-connector’ plugs. b. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end to the HDMI input of your TV. -
Page 12: Channel Search
We at STRONG understand that you can’t wait to enjoy your new HD+ receiver. However, we advise you to read this manual to get the best performance from your STRONG HD+ receiver. To turn your receiver ON or to go to Standby mode, press q on the remote control. Choose... -
Page 13: Operation
buttons on the remote control or press Ok in viewing mode to display the channel list. The volume can be adjusted with vOL+/- or with t u. 6.0 OPERATION In viewing mode, several features are available to make watching TV a true pleasure. This paragraph describes these features. -
Page 14: Volume Control
6.2 volume Control The volume control allows you to adjust the audio volume. Press vOL+/- or t u button to adjust the audio volume. Press the ! button to temporarily mute audio. Press it again to come back to normal volume. -
Page 15: Selecting Subtitle Language
6.5 Selecting subtitle language Press SUb in viewing mode to display a list of available subtitles languages. Use p q to select the subtitle language and press Ok to confirm. Additionally you can adjust your preferred subtitle language as described in chapter 7.2.1. Press SUb in viewing mode to display a list of available subtitle languages. -
Page 16: Favourite Channels
6.8.1 booking a programme from EPG Select a programme as described above. Press RED button. Selected programme will be booked. Next to the programme name the symbol will appear and the programme description will contain the text “Booked”. To cancel programme booking just press the RED button again. You can also make a correction of the booking event via Timer list. -
Page 17: Settings
5. Press to confirm or cancel your changes and exit from the management of your favourite lists. Deleting of Tv programmes 1. By pressing p q select Delete from the Operation list (left column) and press Ok. 2. You will be switched to the full Channel list (central column). Use the p q buttons to select a channel and Ok to mark it for deletion. -
Page 18: Output Settings
7.2.1 Language OSD Language: Select the preferred language for the On Screen display. 1st Audio Language: Select the preferred audio language for watching TV channels. This setting allows you to define the default audio track or language. Digital TV allows the operator to transmit more than one audio track or language. If a channel has multiple audio tracks or languages, the receiver will select the suitable audio track automatically according to your selection. - Page 19 Other options available for conversion of 16:9 video format: 4:3 TV Pan&Scan Displays full screen and high size, but the left and right sides of the screen are cut. Combined Cuts left and right sides of screen to a minor extent and displays black horizontal bars at upper and lower parts.
-
Page 20: Time Setting
NOTE: The correct functionality highly depends on the information from the operator. It is recommended to set this parameter to the age of the youngest child who has access to television with this receiver. Whenever zapping through channels which submit EPG based on parental rate system and if the rate of current broadcasts is higher than the adjusted rate, it requires the PIN code for viewing. -
Page 21: Multimedia
Timer Action: Select a type of event to happen during timer activation. The only available option is Timer which means that the timer will inform you about an upcoming event and switch to the specified channel. Other options will be available later. Press Ok to access the channel list, use p q to select a channel and press Ok to Channel: confirm. -
Page 22: Network
7.3.1 Movies buttons to use in playback preview mode: Switch from window preview to full screen viewing. INFO Get additional information about the video file. vOL+/vOL- Adjust the volume control. buttons to use in Full Screen mode: Switch from window preview to full screen viewing. vOL+/vOL- Adjust the volume control. -
Page 23: Installation
7.4.2 Weather This submenu allows you to watch the weather in your region. Information about current weather conditions and forecasts will be provided on your screen. You can refresh the information about weather conditions (RED), change the location (GREEN) or select a city from the list (YELLOW). Use the virtual on- screen keyboard to enter text characters. - Page 24 NOTE: SatCR can only work in combination with an optional multi-output (max. 8) satellite splitter and a SatCR LNB, an example is STRONG type SRT L780 (max. 4 users). NOTE: SatCR cannot be combined with any other DiSEqC function. SatCR systems are mainly installed by professional experts.
-
Page 25: Troubleshooting
There may be various reasons for faulty operation of the receiver. Please check the receiver according to the procedures shown below. If the receiver does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively you can send a support e-mail via our website: www.strong.tv. -
Page 26: Specifications
The default password is 0000 Password forgotten Contact the local Service Hotline or send an email to our support via www.strong.tv The external USB HDD The power consumption is too Connect an extra power supply does not start. high. - Page 27 Video resolution: PAL: 576i/p, 720p, 1080i, 1080p over HDMI surface Audio Audio mode: Mono L/R, Stereo, Dolby® Digital, Dolby® Digital Plus*, PCM. Transcoding to S/PDIF: Dolby Digital Plus to Dolby Digital or PCM *Dolby Digital Plus and the double-D symbol are registered trademarks of Dolby Laboratories Tuner Type1 F Type, IEC169-24, Female Input frequency range:...
-
Page 28: Terms & Conditions Hd+ (In German)
10.0 TERMS & CONDITIONS HD+ (IN GERMAN) Stand: Juli 2014 Geltungsbereich, vertragsgegenstand und HD+ karte 1.1. Diese allgemeinen Geschäftsbedingungen der HD PLUS GmbH mit Sitz in der Betastraße 1-10, 85774 Unterföhring („HDP“) gelten ausschließlich für den HD+ Service. 1.2. HDP überlässt dem Nutzer nach Maßgabe dieser allgemeinen Geschäftsbedingungen den Besitz an einem Datenträger („HD+ Karte“). Die auf der HD+ Karte gespeicherte Software bzw. - Page 29 5.3. Ersetzt HDP die HD+ Karte aufgrund einer vom Nutzer zu vertretenden Beschädigung oder eines Verlustes, hat dieser Schadensersatz zu leisten. 5.4. Wird die Bereitstellung des HD+ Services aufgrund von Eingriffen in die Software oder Hardware des Nutzers beeinträchtigt oder unterbrochen, die HDP nicht zu vertreten hat, ist der Nutzer nicht zur Rückerstattung einer bereits entrichteten Servicepauschale berechtigt.
- Page 30 Sie umgehend einen Kostenvoranschlag. Zur Einsendung des Gerätes trennen Sie bitte die Gewährleistungskarte ab und senden Sie diese mit dem kompletten Gerät frei Haus an folgende Service-Anschrift: DEUTSCHLAND: STRONG Servicecenter • c/o SVS Service – Center• Pömmelter Straße 2 • 39218 Schönebeck* ÖSTERREICH: STRONG Servicecenter •...
- Page 31 Deutschland und Österreich. Außerhalb dieser beiden Länder wenden Sie sich bitte an die Verkaufstelle, wo Sie dieses Gerät erworben haben. Ausgeschlossen von der kostenlosen Serviceleistung sind: Unsachgemäße Behandlung und Bedienung Aufspielen von nicht von STRONG autorisierter Software Beschädigung durch Dritte oder höhere Gewalt Transportschäden Eingriff durch nicht autorisierte Personen...