Table of Contents
Advertisement
6. OPERATION
In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features in short. Please also read chapter 7 to get more familiar with the menu of your new
receiver with an in-depth explanation of each menu item.
6.1 Changing channels
There are different ways to change channels with your new receiver.
„ Via direct access
„ Via the channel list
„ Via the pq buttons
„ Via the BACK button
6.1.1 Direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 keys on the remote control.
Channel numbers can be up to four digits long. Entering a number with less than four digits is possible.
Just wait a few seconds and your receiver will switch to the selected channel. Or, after entering the number,
press OK to speed up.
6.1.2 Channel list
Press OK in viewing mode to display the Channel List. Use pq to highlight your channel of choice and
press OK once to select the highlighted channel. The channel list is equipped with a {Find} function to make
it easier to find channels. While in the channel list, press GREEN and an alphabet banner will be displayed.
Use pq tu to select the first letter (or letters) of your channel of choice and select OK to confirm or just
press EXIT. All channels beginning with the chosen letter(s) will now be displayed. Select the channel in the
filtered list. While in channel list, use RED to toggle between TV and Radio list.
6.1.3 Using the pq buttons
p will switch to a higher channel.
q will switch a lower channel.
6.1.4 Using the BACK button
Use the BACK button for switching between the previously viewed channel.
6.2 Info Banner
At any time during viewing mode you can press the INFO button to get information about the current
channel as well as the current and following programme*. Press INFO twice to view technical details about
reception of the current channel. Press INFO again or EXIT to close the information. You can change the on-
screen duration of the info banner in the OSD Setting menu.
*Programme information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of different audio formats and/or languages. To select another audio
stream, press AUDIO in viewing mode. A list with available audio streams will now be displayed. Use pq
to select a stream and confirm with OK. With the tu buttons you can choose between Mono, Left, Right or
Stereo audio. Default is Stereo.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TXT button in viewing mode
and use the 0~9 or pq buttons to select the number of the page you wish to see. Subpages (if loaded and
available) can be selected with the tu buttons. Keeping subpages on Auto will let the subpages rotate
11
Advertisement
Table of Contents
