Install Tower Light On Top Of The Rack - Keysight PD1550A System Installation Manual

Install Tower Light on Top of the Rack

Install Tower Light on Top of the Rack

Installing the Light Tower should be done before applying power and turning on
the system. Make sure the rack is turned off and the power cord disconnected
before installing the Tower light.
The four color tower light is shipped in an accessory box. Mount it on top of the
PD1550A rack.
1 Locate the tower light in the
2 Standing on a small step
3 Connect the 8-pin Tower Light
Keysight PD1550A Installation Guide
group of accessories.
ladder, locate and remove two
Phillips mounting screws on
top of the rack.
cable and securely tighten.
Accessory and Probe Installation
45