Cable model
Single-phase
Q-25-10-240
Q-25-10-240-A*
Q-25-17-240
Q-25-17-240-A*
Q-25-20-200
Q-25-20-200-A*
Multi-phase
Q-25-10-3P-200
Q-25-17-3P-160
Q-25-20-3P-160
* Models with "-A" designation for use only in Australia and New Zealand.
Other items
•
Number 2 and 3 Phillips screwdrivers
•
Wire cutters, voltmeter
•
Torque wrench, sockets, and wrenches for mounting hardware
•
Crimp tool PV-CZM-18100, -019100, or -22100 for IQ Field Wireable Connectors
•
Compatible cable clips, including:
Wire management options for IQ Cable attached to module frames
Standard/parallel to frame
Nine Fasteners Inc. NFI-1306
Burndy/Wiley Acme ACC
Heyco Sunrunner-2
Hellermann Tyton MSC2
*
Due to variances in module frame thickness, these wire clips may not work for all modules
Enphase microinverter installation
Installing the Enphase IQ Microinverter for AC Module involves several key steps. Each step listed here is
detailed on the following pages:
Step 1: Install a junction box
Step 2: Position the IQ Cable
Step 3: Terminate the unused end of the IQ Cable
Step 4: Prepare the AC Modules
Step 5: Create the installation map
13
Connector
PV module orientation
spacing
1.3 m
Portrait
2.0 m
Landscape (60-cell and 96-cell)
2.3 m
Landscape (72-cell)
1.3 m
Portrait (all)
2.0 m
Landscape (60-cell and 96-cell)
2.3 m
Landscape (72-cell)
90°/perpendicular to frame
Nine Fasteners Inc. NFI-1306-V90
Burndy/Wiley ACC-F90
© 2023 Enphase Energy Inc. All rights reserved.
IQ Microinverters for AC Module applications
Connector
count per box
240
240
200
200
160
160
June 2023
USM-00001-1.0