enphase IQ7 Installation And Operation Manual page 24

I. Bring the AC Module back onto the roof or other mounting location.
J. Connect the AC Module AC connector and DC connector to the IQ Cable.
K. Energize the AC branch circuit breaker and verify the operation of the replacement microinverter by
checking the Status LED on the connector side of the microinverter.
L. On the ground, use the Enphase Installer App to delete the old microinverter serial number from the
Enphase IQ Gateway database. In Enphase Installer App, once connected to the IQ Gateway:
a. Tap "Micros" > "Manage".
b. Tap the checkbox
c. Tap
M. Add the new microinverter serial number to the IQ Gateway database by initiating a device scan
using one of the following methods:
a. Method 1: Initiate a scan using the Enphase Installer App
• In the Enphase Installer App, once connected to the IQ Gateway, navigate to the
"Overview" screen.
• From the Overview screen, tap "Detected" > "Start Device Scan" to start a new 30-
minute device scan.
• If device scanning on the IQ Gateway is inhibited, the app displays "Scan Inhibited". If
you need to add more microinverters to the system when device scanning is inhibited on
the IQ Gateway, you must use the Enphase Installer App scanning tool to provision them
on the IQ Gateway, rather than using the IQ Gateways device scanning function to
discover them. If this is not possible and you need to enable device scanning on the IQ
Gateway, contact Enphase customer support at
b. Method 2: Use an IQ Gateway
• Press the "Device Scan" button on the IQ Gateway. The IQ Gateway begins a 15-minute
scan to identify all the microinverters deployed at the site. The Microinverter
Communications LED
N. Log in to Enphase App to use Enphase Installer App's Array Builder to add the newly detected
microinverter to the virtual array.
O. Ship the old microinverter to Enphase using the supplied return-shipping label.
24
to the right of the microinverter serial number that you replaced.
to delete the microinverter from the IQ Gateway database.
flashes green during the scan.
© 2023 Enphase Energy Inc. All rights reserved.
IQ Microinverters for AC Module applications
enphase.com/en-us/support/contact.
June 2023
USM-00001-1.0