The IQ Energy Router+ includes the Enphase IQ Energy Router, Energy Meter, and SG Ready Relay. The IQ Energy Router integrates Enphase solar and storage battery
systems with heat pumps and EV chargers and other devices to maximize self-consumption and minimize costs for the overall site. Installers should use the Enphase
Installer App and the Enphase Installer Portal to install and maintain the system. System owners can use the Enphase App to monitor energy and control the system.
The IQ Energy Router, Energy Meter, and SG Ready Relay are connected to the home router either directly or via an Ethernet switch.
To install the IQ Energy Router, Energy Meter, and SG Ready Relay, read and follow all warnings and instructions in this guide. Safety warnings are listed at the end of
this guide. If you do not fully understand any of the concepts, terminology, or hazards outlined in these instructions, refer installation to a qualified electrician or installer.
All installations must comply with national and local electrical codes. Professional installation is recommended.
What's in the box
The box contains the IQ Energy Router, CAT 6 Ethernet cable with RJ45
jack at either end, DC power supply cable, TQ EM420 Energy Meter, and
Page 1
EV chargers and other devices to maximize self-consumption and minimize costs for the overall site. Installers should use the Enphase Installer App and the Enphase Installer Portal to install and maintain the system. System owners can use the Enphase App to monitor energy and control the system.
Page 2
What’s in the box (Cont.) IQ Energy Router Specifications The energy meter, TQ EM420 Energy Manager, communicates wirelessly to the IQ Energy Router and measures the energy consumption of the heat Enviromental specification, standards, and certification pump. For more detailed specifications, click Energy Meter or scan the following QR code:...
Page 3
LAN. If N coming from the output of the Energy Meter to the supply the issue persists, contact customer support at https://enphase.com/ terminal L1, L2, L3, and N of the heat pump as shown in the following figure: contact/support.
Page 4
Setting up the SG Ready Relay C ) Network connection: Plug the Ethernet cable coming from the home router or Ethernet switch into the LAN port of the SG Ready Relay as shown in the following figure: The following hardware (not included in the box) is required for installa- tion: •...
Page 5
Centrica Hive Limited with or dismantling the IQ Energy Router, SG Ready Relay, Millstream and Energy Meter will void the warranty. If the equipment Maidenhead fails, contact Enphase Customer Support (https://enphase. Berkshire com/contact/support) for assistance or replacement equip- SL4 5GD, UK ment.