Iq Cable Specifications - enphase IQ7 Installation And Operation Manual

Monitoring
Integrated DC disconnect
Integrated AC disconnect
9 Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.

IQ Cable specifications

Operating mode
Voltage rating
Voltage withstand test (kV/1min)
Max DC conductor resistance (20ºC) (Ω/km)
Insulation resistance (20ºC)
System temperature range (ambient)
Cable temperature rating
Cable rating
Certification
Flame test rating
Cable conductor insulator rating
Environmental protection rating
UV resistance
Compliance
Conductor size
Maximum loop size
Drop connector dimensions
Terminator cap dimensions
36
IQ7A-72-E-ACM-INT Microinverter parameters
© 2023 Enphase Energy Inc. All rights reserved.
IQ Microinverters for AC Module applications
Enphase Installer Portal monitoring options
require an Enphase IQ Gateway
The DC connector has been evaluated and
approved for use as the load-break disconnect.
The AC connector has been evaluated and
approved for use as the load-break disconnect.
Description
600 V
AC 3.0
5.433
≥20M (Ω/km)
-40ºC to 65ºC (-40ºF to 149ºF)
90ºC Dry/90ºC Wet
DG
UL 3003, TC-ER equivalent
FT4
THHN/THWN-2
IEC 60529 IP67 NEMA 6
720 h
RoHS, OIL RES I, CE, UV Resistant, combined UL
for Canada, and the United States
12 AWG
12 cm (4.75")
11.8 cm x 6.0 cm x 3.2 cm (4.64" x 2.36" x 1.25")
3.6 cm diameter x 5.1 cm tall (1.4" x 2")
June 2023
USM-00001-1.0