enphase IQ7 Installation And Operation Manual page 35

AC port backfeed under single fault
Power factor setting
Maximum microinverters per 20 A (max) AC branch
9
circuit 230 VAC (single-phase)
EN 50530 (EU) weighted efficiency 230 VAC (single-
phase)
Static MPPT efficiency (weighted, ref EN 50530)
Inverter topology
Total harmonic distortion
Ambient temperature range
Night tare loss
Storage temperature range
Compatibility
Dimensions not including mounting bracket
Connector type
Weight
Environmental category/UV exposure rating
Maximum altitude
Cooling
Relative humidity range
Approved for wet locations
Pollution degree
Communication
Standard warranty term
Compliance
Grounding
35
IQ7A-72-E-ACM-INT Microinverter parameters
IQ7A-72-E-ACM-INT Microinverter parameters
Miscellaneous parameters
Features and Specifications
© 2023 Enphase Energy Inc. All rights reserved.
IQ Microinverters for AC Module applications
A
11 (single-phase)
39 (multi-phase, requires 25 A
OCPD)
%
%
Isolated (HF transformer)
%
-40
°C
mW
-40
°C
Pairs with 96-cell PV modules
219 mm x 191 mm x 37.9 mm (approximate)
Enphase EN-4 DC connector
1.5 kg (3 lbs.)
IP67/outdoor
2,000 metres
Natural convection - no fans
4% to 100% condensing
Yes
PD3
Power line
enphase.com/warranty
NRS-097-2-1:2017, AS/NZS 4777.2, RCM,
IEC/EN 61000-6-3, IEC/EN 62109-1, IEC/EN
62109-2, EN 50549, G98/G99, VDE-AR-N-4105
The DC circuit meets the requirements for
ungrounded PV arrays. Ground fault protection
(GFP) is integrated into the class II double-
insulated microinverter.
0
1.0
96.5
99.5
5
65
50
85
June 2023
USM-00001-1.0