enphase IQ7 Installation And Operation Manual page 8

8
When installing the IQ Cable and accessories, adhere to the following:
• Do not expose the terminator cap or cable connections to directed,
pressurized liquid (water jets, and so on).
• Do not expose the terminator or cable to continuous immersion.
• Do not expose the terminator cap or cable connections to continuous
tension (for example, tension due to pulling or bending the cable near the
connection).
• Use only the connectors provided.
• Do not allow contamination or debris in the connectors.
• Use the terminator cap and cable connections only when all parts are
present and intact.
• Do not install or use in potentially explosive environments.
• Do not allow the terminator to come into contact with an open flame.
• Fit the terminator cap using only the prescribed tools and in the
prescribed manner.
• Use the terminator to seal the conductor end of the IQ Cable; no other
method is allowed.
© 2023 Enphase Energy Inc. All rights reserved.
IQ Microinverters for AC Module applications
June 2023
USM-00001-1.0