Table of Contents
Advertisement
11.8
Installing the fork legs
–
3
Loosen screws
–
4
Loosen screws
A00788-10
Main work
–
Position the fork legs.
Air bleeder screw
front.
A
Valve
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
H01182-10
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The pres-
sure and rebound damping is located in the right fork leg.
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple
clamp
A00778-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws
.
Guideline
Screw, brake line
I00175-11
holder
Finishing work
–
Install the front wheel.
SERVICE WORK ON THE CHASSIS 11
. Remove the left fork leg.
. Remove the right fork leg.
1
of the right fork leg is positioned to the
2
.
M8
20 Nm (14.8 lbf ft)
3
.
M8
15 Nm (11.1 lbf ft)
M8
25 Nm (18.4 lbf ft)
EJOT
1.7 Nm (1.25 lbf ft)
(
p. 90)
4
.
Loctite
®
243™
47
Advertisement
Table of Contents
