Installing The Fork Legs - GAS GAS MC 250F 2021 Owner's Manual

11.8

Installing the fork legs

Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and the brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front wheel is
removed.
A00797-10
–
3
Loosen screws
–
4
Loosen screws
A00788-10
Main work
–
Position the fork legs.
Air bleeder screw
front.
A
Valve of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
H01182-10
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The pres-
sure and rebound damping is located in the right fork leg.
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple
clamp
A00778-11
SERVICE WORK ON THE CHASSIS 11
1
and take off the clamp.
2
and take off the brake caliper.
. Remove the left fork leg.
. Remove the right fork leg.
1
of the right fork leg is positioned to the
2
.
M8 20 Nm (14.8 lbf ft)
3
.
M8 15 Nm (11.1 lbf ft)
47