11 SERVICE WORK ON THE CHASSIS
11.6
44
S04528-10
Installing the fork legs
H01182-10
S04528-11
S04527-11
–
3
Loosen screws
. Remove the left fork leg.
–
4
Loosen screws
. Remove the right fork leg.
Main work
–
Position the fork legs.
1
Air bleeder screw
of the right fork leg is positioned to the
front.
A
Valve
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The pres-
sure and rebound damping is located in the right fork leg.
–
2
Tighten screws
.
Guideline
Screw, top triple clamp
–
3
Tighten screws
.
Guideline
Screw, bottom triple
clamp
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws
.
Finishing work
–
Install the front wheel.
(
M8
20 Nm (14.8 lbf ft)
M8
15 Nm (11.1 lbf ft)
4
.
25 Nm (18.4 lbf ft)
Loctite
p. 83)
®
243™