Installing The Fork Legs - GAS GAS MC50 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.8
40
F03022-10

Installing the fork legs

F02179-10
F03022-11
F03021-10
–
3
Loosen screws . Remove the left fork leg.
–
4
Loosen screws . Remove the right fork leg.
Main work
–
Position the fork legs.
1
Bleeder screws are positioned toward the rear.
Info
The second milled groove in the fork leg must be flush with
the upper edge of the upper triple clamp.
–
2
Tighten screws .
Guideline
Screw, top triple clamp
–
3
Tighten screws .
Guideline
Screw, bottom triple
clamp
–
Position the brake caliper, mount screw
Guideline
Screw, front M8x60
brake caliper
–
5
Mount and tighten screw
Guideline
Screw, front M8x40
brake caliper
–
Position the brake line and the clamp. Mount and tighten
6
screws .
Guideline
Screw, brake line
bracket
Finishing work
–
Install the front wheel. (
M8 20 Nm (14.8 lbf ft)
M8 15 Nm (11.1 lbf ft)
4
, and tighten.
20 Nm (14.8 lbf ft)
Loctite
.
20 Nm (14.8 lbf ft)
Loctite
EJOT 1.7 Nm (1.25 lbf ft)
p. 75)
® 243™
® 243™