Installing The Fork Legs - GAS GAS MC 85 2023 Owner's Manual

11.6

Installing the fork legs

–
3
Loosen screws
–
4
Loosen screws
S04327-10
–
Position the fork legs.
Air bleeder screw
front.
A
Valve of the left fork leg faces the front.
Info
The second milled groove (from the top) must be flush with
the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The pres-
H02312-11
sure and rebound damping is located in the right fork leg.
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S04327-11
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
spacers.
Long-life grease (
–
Insert the spacers.
H00935-15
–
Clean and grease the wheel spindle.
Long-life grease (
–
Position the front wheel.
–
Insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
S04328-10
SERVICE WORK ON THE CHASSIS 11
. Remove the left fork leg.
. Remove the right fork leg.
1
of the right fork leg is positioned to the
2
.
M8 17 Nm (12.5 lbf ft)
3
.
M8 15 Nm (11.1 lbf ft)
4
and contact surfaces
p. 119)
p. 119)
5
.
M20x1.5 35 Nm (25.8 lbf ft)
B
of the
43