Table of Contents
Advertisement
1.1 Overview
This chapter provides a brief outline of the functions and features of the SYS-111E-FWTR,
the SYS-111E-FWTR-EU, and the SYS-111E-FDWTR. All systems are based on the
X13SEW-TF motherboard. The SYS-111E-FWTR and SYS-111E-FWTR-EU are based on
the CSE-515B-R801W chassis. The SYS-111E-FDWTR is based on the CSE-515B-R601W
chassis.
Chassis
Motherboard
Processor Support
Memory
Drive Support
Expansion Slots
Networking
I/O Ports
System Cooling
Power
Form Factor
Notes: The Quick Reference Guide can be found on the product page.
The following safety agency or regulatory models associated with the
SYS-111E-FWTR/FWTR-EU/FDWTR have been certified as compliant with UL or CSA:
515B-R8X13, 515B-R6DX13, 515B-8, 515B-6D.
Chapter 1
Introduction
CSE-515B-R801W/R601W
X13SEW-TF
Single 4th or 5th Generation Intel® Xeon® Scalable Processor (LGA
4677 in Socket E) with up to 52 cores and a thermal design power
(TDP) of up to 300 W
Eight memory slots and up to 2048 GB of ECC RDIMM/RDIMM 3DS
DDR5 memory with speeds of up to 4800 MT/s (4400 MT/s when fully
populated) for the 4th Generation and 5600 MT/s (4400 MT/s when
fully populated) for the 5th Generation
Two internal 2.5" SATA3 drive bays
One PCIe 5.0 x16 LP slot
Two PCIe 5.0 x16 FHFL slots
One M.2 PCIe 3.0 x2 slot supporting the 2280 and 22110 form factor
Two 10GbE LAN ports
One dedicated BMC LAN located on the I/O panel
COM: one front serial COM port
VGA: one front VGA port
USB: two front USB 2.0 ports and two USB 3.2 Gen 1 ports
Six (4 cm x 4 cm x 5.6 cm) counter-rotating fans
One heatsink for 1U system
One air shroud for CPU
One optional air shroud for PCIe cards
SYS-111E-FWTR: Redundant AC 800 W
SYS-111E-FWTR-EU: Redundant AC 800 W Titanium Level
SYS-111E-FDWTR: Redundant DC 600 W
1U rackmount, (WxHxD) 17.2 x 1.7 x 16.9 in (437 x 43 x 429 mm)
9
Chapter 1: Introduction
Advertisement
Table of Contents
Troubleshooting
