Removing The Processor Carrier Assembly From The Phm - Supermicro X13SET-PT User Manual

Super X13SET-PT User's Manual

Removing the Processor Carrier Assembly from the PHM

To remove the processor carrier assembly from the PHM, please follow the steps below:
1. Detach the four plastic clips (marked a, b, c, d) on the processor carrier assembly from
the four corners of the heatsink (marked A, B, C, D) as shown in the drawings below.
1U Heatsink (View of Gold Contacts Facing Up and Heatsink Bottom Side)
b b
d
d
B
c
c
B
Pin 1
Pin 1
a
a
D
D
C
C
A
A
SP MCC
SP XCC
2. When all plastic clips are detached from the heatsink, remove the processor carrier
assembly from the heatsink.
1U Heatsink (View of Gold Contacts Facing Up and Heatsink Bottom Side)
SP XCC SP MCC
32