Route Plan - CG CAPTIVA 7 Owner's Manual

NAVIgATION SYSTEm
With the A-Navi system you can enter the desired destination (refer to Selecting a
destination – go to, previously in this supplement) and also specify how the route is to
be calculated.
The A-Navi system allows you to set 2
waypoints during navigation. The system
calculates a proposed route according
to the sequence of the waypoints you've
specified and guides you to the final
destination.
After entering waypoints/destinations, the
system enters the Route Plan screen.
DESTINATION mANAgEmENT
Add or delete destination(s)
The A-Navi system allows you to add up to 2 waypoints and destinations. Usually the
start point is the Navigation systems current fixed position.
Touch the Add button to enter the Search Menu screen to search for waypoints/
destinations. Refer to Selecting a destination – go to, previously in this
supplement.
Touch the Delete button and the highlighted waypoint/destination in yellow is
removed.
Change the sequence of destination
Touch the up arrow to move the highlighted waypoint/destination up.
Touch the down arrow to move the highlighted waypoint/destination down.
Note A grayed out key indicates the function is disabled.
Display destination on map
In the Route Plan screen, touch
enter the map location of the highlighted
waypoint/destination. This allows you:
• To tap on the map to check information
of the waypoint/destination,
• Zoom out/in,
• To move the map in all directions.
Chapter 1B
3

– ROUTE PLAN

to
1B-61
AUDIO
C100_NAV_080
C100_NAV_081