CG CAPTIVA 7 Owner's Manual page 229

Side turn signal lamps (5 W)
1. Using a flat-blade
carefully pry the side turn signal lamp
assembly away from the fender.
2. Rotate the bulb holder counter-
clockwise.
3. Remove the bulb from the lamp
housing by pulling the bulb straight
out of the holder.
4. Push the replacement bulb into
the bulb holder and rotate the bulb
clockwise.
5. Push the side turn signal lamp
assembly back into its original position
ensuring it is securely fastened.
6. Check lamp operation.
Rear tail lamps
1. Open the tailgate.
2. Remove the two screws and the lamp
assembly.
3. Remove the bulb holder by rotating it
anticlockwise.
4. Push the bulb inward and rotate it
anticlockwise.
5. Insert the replacement bulb into the
holder and rotate it clockwise.
6. Replace the bulb holder into the lamp
housing and rotate it clockwise to
secure.
7. Refit the lamp assembly into the
vehicle securing with the two screws.
• Reverse (16 W).
• Stop/tail (21/5 W).
• Rear fog (21 W).
• Rear turn signal (21 W).
BULB REPLACEmENT cont.
3
screwdriver,
Chapter 6
EMERGENCIES
6-31
C100_6026
C100_6027