CG CAPTIVA 7 Owner's Manual page 25

High/low beam
Switching between high and low beam
requires the low beam lamps to be on.
Push the lever toward the front of the
vehicle to switch from low beam to high
beam and return the lever to the original
position for low beam.
The headlamp high beam indicator lamp
on the instrument panel lights up when
the headlamps are in high beam.
Flashing high beam
It is also possible to flash the high beams
for signalling purposes by pulling the lever
toward you (even with the headlamps
switched off). The lights remain in high
beam as long as the lever is held in this
position.
Battery saver
The battery saver prevents the battery
from being discharged.
If the headlamps are left in the ON
position, they will switch off automatically
10 minutes after the ignition switch is
turned to the LOCK position.
Note If the lights are switched on 10
minutes after this feature is activated, the
battery saver will not function.
LIgHTS cont.
Chapter 1A
DASHBOARD
1A-19
C100_1A056
C100_1A023