CG CAPTIVA 7 Owner's Manual page 230

6-32
Chapter 6
EMERGENCIES
High mount stop lamp (5 W)
1. Open the tailgate.
2. Remove the four nuts from the tailgate
cover assembly.
3. Remove the bulb holder.
4. Pull the bulb straight out of the bulb
holder and install the replacement
bulb.
5. Reinstall the bulb holder and the
tailgate cover assembly, secure with
the four nuts.
License plate lamps (5 W)
1. Remove the two screws and the
lamp lens.
2. Rotate the bulb holder anticlockwise
and remove it from the housing.
3. Pull the bulb straight out of the bulb
holder and install the replacement
bulb.
4. Rotate the bulb holder clockwise to
reinstall it into the lamp housing.
5. Refit the lamp lens, securing with the
two screws.
Front door step lamp (5 W)
1. Using a flat-blade
carefully pry the lamp lens away from
the front door trim.
2. Pull the bulb straight out of the bulb
holder and install the replacement
bulb.
3. Refit the lamp lens ensuring it is
securely fastened.
BULB REPLACEmENT cont.
screwdriver,
C100_6028
C100_6031
C100_6033