Manual Heating, Air Conditioning - CG CAPTIVA 7 Owner's Manual

1A-26
Chapter 1A
DASHBOARD

mANUAL HEATINg, AIR CONDITIONINg

Air outlet selector
Different vents are selected when the air selector is set in the following positions:
Air flows from the four face level outlets in the instrument panel.
The blending mode directs airflow through both the instrument panel outlets
and the floor outlets.
This mode also directs airflow through the rear floor outlets.
The heater mode directs most of the airflow through the floor outlets, with some
air going to the windscreen and side window demister vents.
This mode also directs airflow through the rear floor outlets.
This mode divides airflow equally between the windscreen demister outlets
and the floor outlets. A small amount of air will also be directed toward the
side windows.
This mode also directs airflow through the rear floor outlets.
Air flows from the window demist and windscreen demist outlets, a small amount
is also directed to the side vents.
Air conditioning switch
Press this button to switch the air
conditioning on. The engine must be
running for the feature to work. Set the
fan position to 1, 2, 3, or 4 to begin air
circulation. An indicator lamp illuminates
on the button when the air conditioning is
in use.
Note The fan must be switched on for the
air conditioning to work.
Even when the air conditioning system
is on, your vehicle will produce warm
air if the temperature control knob is set
to warm.
Press the air conditioning switch again to switch the air conditioning off.
You may notice water dripping under the vehicle sometimes after driving with air
conditioning on. This is normal because your air conditioning system removes moisture
from the air inside the cabin.
Because the compressor of the air conditioning system shares the engine power, you
may notice a slight change in engine power and performance when the compressor
operates.
3
cont.
C100_1A033