Power Windows - CG CAPTIVA 7 Owner's Manual

3-16
Chapter 3
KNOW YOUR VEHICLE
The main switches for the power windows
are located on the driver's door panel.
The front switches are for the front
windows and the rear switches are for the
rear windows.
Individual switches are located on the
front passenger door and on the rear
doors.
The switches for the power windows are
operational when the ignition switch is in
the ON or ACC position.
Driver's window auto function
The driver's window has an auto down two stage function.
To lower the window, press down firmly, then release the switch. The window
will automatically fully open. To stop the window while it is opening, lift the
switch up.
To raise the window, pull up and hold the switch. To stop the window, release
the switch.
Passenger windows
To open a passenger's window, push down on the switch and hold it down until the
window reaches the desired position then release.
To close a window, pull back on the switch until the window reaches the desired position
then release.
Note The rear windows do not open fully.
Lock switch
The lock switch for the power windows is
located on the driver's door armrest.
When the lock switch is in the on position
the passengers are not able to operate
their windows from the window switch
fitted to their door.
Pressing it again unlocks the passenger's
power windows and allows operation from
the individual window switches.
Note After the ignition key has been
turned to the LOCK position or removed
from the ignition switch, the windows can
be operated for up to 10 minutes or until
the driver's door is opened.

POWER WINDOWS

C100_3032