CyberData 011403 Operation Manual page 66

Web Page Item
Polycom Default Channel
Polycom Priority Channel
Polycom Emergency Channel
2.3.10.1 Assigning Priority
The device will prioritize simultaneous audio streams according to their priority in the list.
If both SIP and Multicast is enabled, SIP audio streams are considered priority 4.5. SIP audio will
interrupt multicast streams with priority 0 through 4 and will be interrupted by multicast streams with
priority 5 through 9.
During priority 9 multicast streams, the volume is set to maximum.
Note
Ringtones and Ringtones all play at the same priority level. This means that it is possible to have a nightring tone
Nightringtones
and a normal ringtone playing at the same time.
Operations Guide
Table 2-16. Multicast Page Parameters (continued)
Description
When a default Polycom channel/group number is selected, the device will
subscribe to the default channel for one-way group pages. Group Numbers 1-25
are supported. Or, select Disabled to disable this channel.
When a priority Polycom channel/group number is selected, the device will
subscribe to the priority channel for one-way group pages. Group Numbers 1-25
are supported. Or, select Disabled to disable this channel.
When an emergency Polycom channel/group number is selected, the device will
subscribe to the default channel for one-way group pages. Group Numbers 1-25
are supported. Or, select Disabled to disable this channel.
Click the Save button to save your configuration settings.
Click on the Reboot button to reboot the system.
SIP calls, multicast streams, ring tones, ringback tones, and nightring tones are all
prioritized.
931976A
Installing the InformaCast Enabled Paging Amplifier
InformaCast Enabled Paging Amplifier Setup
CyberData Corporation
59