Confirm Operation - CyberData 011403 Operation Manual

2.2.9 Confirm Operation

After connecting the InformaCast Enabled Paging Amplifier to the 802.3af compliant ethernet hub,
use the LEDs on the InformaCast Enabled Paging Amplifier face to confirm that the InformaCast
Enabled Paging Amplifier is operational and linked to the network.
LED
Power (PWR)
Status
Link/Network Activity
(Link/Act.)
Link / Act.
Operations Guide
Table 2-6. InformaCast Enabled Paging Amplifier LEDs
Color Function
The power LED is
BLUE/GREEN
BLUE
blink during a boot up or a phone call.
GREEN After supplying power to the device, a steady
illuminates.
After about 20 seconds the
indicate that the board is fully booted.
The status LED will blink during a page when it is online.
GREEN The Link/Network Activity (Link/Act.)
indicate network traffic.
Figure 2-18. InformaCast Enabled Paging Amplifier LEDs
Link/Network Activity (Link/Act.) LED
(GREEN)
931976A
Installing the InformaCast Enabled Paging Amplifier
InformaCast Enabled Paging Amplifier Setup
GREEN in low power mode (
during high power mode (
GREEN
Power (Pwr) LED
(BLUE/GREEN)
Power
Status LED
(GREEN)
802.3af) and a
802.3at) .
The power LED will
GREEN Status LED
Status LED will blink twice to
GREEN
LED blinks to
Status
CyberData Corporation
22