CyberData 011403 Operation Manual page 42

Web Page Item
Priority
Scene
ADA Compliant
Slow Fade
Fast Fade
Slow Blink
Fast Blink
Brightness
Color
Red
Green
Blue
Operations Guide
Table 2-10. Device Page Parameters (continued)
Description
Indicates the priority of the Singlewire broadcast, with 1 the highest
priority and 10 the lowest.
Use this section to select the strobe flashing behavior for the Singlewire
Broadcast.
Strobe will blink ON at the specified brightness for 150ms then OFF for
350ms during the duration of the event.
Strobe will increase in brightness from 0 to the specified brightness and
back to 0 over the course of about 3.5 seconds during the duration of the
event.
Strobe will increase in brightness from 0 to the specified brightness and
back to 0 over the course of about 1.5 seconds during the duration of the
event.
Strobe will blink ON at the specified brightness for one second then OFF
for one second during the duration of the event.
Strobe will blink ON at the specified brightness then OFF five times per
second during the duration of the event.
How bright the strobe will blink when there is a Singlewire Broadcast.
This is the maximum brightness for "fade" type scenes.
Select the desired color (only one may be chosen).
The red LED value for the Singlewire Broadcast.
The green LED value for the Singlewire Broadcast.
The blue LED value for the Singlewire Broadcast.
Click the Save button to save your configuration settings.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the
web page items. First click on the Toggle Help button, and you will see a
question mark (
mouse pointer to hover over a question mark to see a short description of
a specific web page item.
Click on the Test Relay button to do a relay test.
931976A
Installing the InformaCast Enabled Paging Amplifier
InformaCast Enabled Paging Amplifier Setup
) appear next to some of the web page items. Move the
CyberData Corporation
35