1.6.4.
1.6.5.
1.7.
12
The device contains limit switch. Check the stretching carefully and periodically –
eventually adjust.
Band saw cover
It covers the visible area of the saw band from left guiding cube to the frame.
Never switch on the saw band drive if this cover is not mounted!
Brush cover
It covers the saw blade brush.
Never switch on the saw band drive if this cover is not mounted!
Safety notes for the cooling
Attention!
When handling cooling agents always wear hazardous
fluid-proof gloves!
Wear protective goggles!
Cooling liquid can get in contact with your eyes and may
cause permanent severe injuries
Manual version:
1.02 / Nov. 2011
Manual rev.:
1