Table of Contents
Advertisement
2.
Screw off the screw and take down the washer.
3.
Pull off the wheel from the shaft by means of the three-armed puller. If bearing
stayed on the shaft, pull off it too
4.
Check score of the bearings of the stretching wheel and replace them for new.
5.
Clean the shaft and grease it with oil. Insert retaining ring to the groove.
6.
Install bearing on the shaft and move it to the retaining ring. Insert the distance
ring on the shaft and move it to the bearing.
7.
Insert the retaining ring to the hole in the wheel.
53
Advertisement
Table of Contents
