Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the appli-
cable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for
DOT 5 brake fluid.
Avoid contact between the brake fluid and painted parts. Brake fluid corrodes paint.
Only use clean brake fluid from a sealed container.
–
Move the brake fluid reservoir mounted on the handlebar to a hori-
zontal position.
–
Remove screws
–
2
Take off cover
F03690-10
–
Remove screws
–
Press back the brake linings by slightly tilting the brake caliper later-
ally on the brake disc. Carefully pull the brake caliper up and off the
brake disc.
–
Press the brake piston back into the basic position and ensure that
brake fluid does not flow out of the brake fluid reservoir; extract
some if necessary.
Info
Do not operate the hand brake lever if the brake caliper has
F03695-10
been removed.
–
Remove cotter pins
ings.
–
Clean the brake caliper and the brake caliper bracket.
F03696-10
–
Check that spring plate
8
ing plate
in the brake caliper bracket are seated correctly.
F03692-10
1
.
3
with membrane
.
4
.
5
6
, pull out pin
, and remove the brake lin-
7
in the brake caliper and brake pad slid-
BRAKE SYSTEM 12
85