15 COOLING SYSTEM
15.5
106
Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Refilling with coolant
Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
Condition
The engine is cold.
Preparatory work
–
Remove the engine guard. (
Main work
–
Position the motorcycle upright.
–
Place an appropriate container under the water pump cover.
–
1
Remove screw
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Screw, water pump
F03740-10
cover
Main work
–
Make sure that screw
–
Position the motorcycle upright.
–
Pour coolant in up to measurement
Guideline
A
Distance
above the radia-
tor fins
Coolant
F03741-10
–
Mount the radiator cap.
–
Go for a short test ride.
–
Check the coolant level. (
Finishing work
–
Install the engine guard. (
p. 49)
2
. Take off radiator cap
.
1
with a new seal ring.
M6
10 Nm (7.4 lbf ft)
1
is tightened.
A
above the radiator fins.
10 mm (0.39 in)
0.9 l (1 qt.)
Coolant (
p. 105)
p. 50)
p. 135)