Installing The 12-V Battery - GAS GAS MC 250F FACTORY EDITION 2023 Owner's Manual

14.2

Installing the 12-V battery

Main work
–
Pull up battery holding bracket
battery compartment with the terminals facing upwards and secure
with battery holding bracket
12-V battery (HJTZ5S-FP-C) (
Info
Ensure that the cable is routed correctly.
W00224-11
–
Slide the battery holding bracket into the attachment.
–
Mount and tighten screw
Guideline
Screw, battery support
bracket
–
3
Attach relay
W00226-11
–
Connect positive cable
Guideline
Screw, battery terminal M5
–
Connect negative cable
Guideline
Screw, battery terminal M5
Contact disks
7
sockets with the claws toward the battery terminal.
–
Slide positive terminal cover
W00227-10
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
ELECTRICAL SYSTEM 14
1
, insert the 12-V battery into the
1
.
p. 131)
2
.
M6 6 Nm (4.4 lbf ft)
in the holder.
4
to the 12-V battery.
2.5 Nm (1.84 lbf ft)
5
to the 12 V battery.
2.5 Nm (1.84 lbf ft)
A
must be mounted under screws
8
over the positive terminal.
p. 61)
p. 63)
6
and cable
99