10 TUNING THE CHASSIS
46
Adjusting the handlebar position with the handlebar clamp
–
Place the handlebar support in the required position.
Info
The handlebar support is longer and higher on one side.
–
Mount and tighten the screws
Guideline
Screw, handle-
bar support
Rigid handlebar support bushing (A46001038010)
The conical side of bushing faces downwards.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamp
F03781-10
–
Mount screws
–
First bolt the handlebar clamp with screws
higher side of the handlebar supports so that both parts touch.
–
Tighten screws
Guideline
Screw, handlebar
clamp
Finishing work
–
Mount the handlebar cushion.
7
with the bushings
M10
40 Nm (29.5 lbf ft)
2
.
1
, but do not tighten yet.
1
1
evenly.
M8
20 Nm (14.8 lbf ft)
8
.
Loctite
®
243™
onto the longer,