Start Button; Combination Switch; Overview Of Indicator Lights - GAS GAS MC 250F FACTORY EDITION 2023 Owner's Manual

6.5

Start button

6.6

Combination switch

6.7

Overview of indicator lights

1
Start button is fitted on the right side of the handlebar.
Possible states
• The start button
• The start button
actuated.
F03650-10
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated when the
1
indicator lamp
STANDARD with TC – STANDARD mapping with traction
1 TC
control is activated when the indicator lamp
TC indicator lamp light up.
ADVANCED – ADVANCED mapping is activated when the
2
indicator lamp
ADVANCED with TC – ADVANCED mapping with traction
2 TC
control is activated when the indicator lamp
TC indicator lamp light up.
The engine characteristic can be changed using button
2
ton on the combination switch.
Traction control can be activated using the TC button
nation switch.
Launch control and the quickshifter can also be activated using the com-
bination switch.
F03761-10
Possible states
Malfunction indicator lamp lights up/flashes orange – The
OBD has detected a malfunction in the vehicle electronics.
The malfunction indicator lamp also lights up if traction
control is activated and the speed limiter intervenes.
TC indicator lamp lights up orange – TC is enabled or is
currently intervening. The TC indicator lamp flashes if
launch control is activated.
QS indicator lamp lights up blue – The quickshifter is acti-
vated. The QS indicator lamp flashes when the quickshifter
F03758-10
is being programmed.
Indicator lamp
activated.
Indicator lamp
activated.
is in the basic position
is pressed – In this position, the starter motor is
A
lights up.
B
lights up.
3
lights up white – STANDARD mapping is
A
lights up green – ADVANCED mapping is
B
CONTROLS 6
A
and the
B
and the
1
and but-
on the combi-
15