Table of Contents
Advertisement
12 BRAKE SYSTEM
12.6
12.7
84
Checking that the brake linings of the front brake are secured
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized GASGAS Motorcycles workshop
will be glad to help.)
Changing the brake linings of the front brake
Warning
Danger of accidents Incorrect servicing will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized GASGAS Motorcy-
cles workshop will be glad to help.)
Warning
Skin irritation Brake fluid causes skin irritation.
–
Keep brake fluid out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
–
Consult a doctor immediately if brake fluid has been swallowed.
–
Rinse the affected area with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact with the
eyes.
–
If brake fluid spills on to your clothing, change the clothing.
Warning
Danger of accidents Old brake fluid reduces the braking effect.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule.
(Your authorized GASGAS Motorcycles workshop will be glad to help.)
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
–
Check the brake linings for lining thickness
Minimum thickness
»
If it is less than the minimum thickness:
–
Change the brake linings of the front brake.
–
Check the brake linings for damage and cracking.
»
If there is damage or cracking:
–
Change the brake linings of the front brake.
–
Check that the brake linings are secured.
F03691-10
»
If the brake linings are not secured correctly:
–
Secure brake linings, replace with new parts if necessary.
A
.
≥ 1 mm (≥ 0.04 in)
A
(
p. 84)
(
p. 84)
Advertisement
Table of Contents
