Changing The Fuse Of The Fuel Pump - GAS GAS MC 250F FACTORY EDITION 2023 Owner's Manual

Table of Contents

Advertisement

14 ELECTRICAL SYSTEM
14.5
102
W00228-10

Changing the fuse of the fuel pump

Warning
Fire hazard Incorrect fuses overload the electrical system.
Only use fuses with the required ampere value.
Do not bypass or repair fuses.
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is driven.
Allow the voltage regulator to cool down before performing any work.
Info
The fuel pump is protected by the fuel pump fuse. This is located under the seat.
Main work
Pull starter relay
Take off protection caps
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
A spare fuse
Insert a new main fuse.
Fuse (58011109110) (
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
Mount the protection caps.
Mount the starter relay onto the holder and route the cable.
F03752-10
Finishing work
Install the fuel tank.
Install the right side panel. (
Install the frame protector. (
Mount the seat. (
Install the air filter box cover. (
1
from the holder.
2
.
3
.
4
is located in the starter relay.
p. 131)
(
p. 70)
p. 62)
p. 50)
p. 61)
p. 63)
A
.

Advertisement

Table of Contents
loading

Table of Contents